Jinan Rongqi Intelligent Technology Co.,Ltd.
Your trust will be our greatest drive.
Add to Cart
Horizontal Automatic Glass Drilling Machine
This drilling machine has two drilling tips, one at up side and one at the lower side. When the glass is put on the table, it is fixed pneumatically ad the lower spindle will rise up automatically to drill from the bottom side of the glass. Then the upper spindle will drill the top side of the glass and thus, the hole is drilled through. The cooling water runs inside the drilling bits so that the cooling effect is directly acted onto the glass without any loss. Tapping or chamfering can be made on the hole for particularly purpose. The spindle design is sophisticated such that it is strong enough for 24 hours running in one day. The grind and anti-corrosive spindle enable maintenance free.
Main Part:
l Machine basement, cast steel
l Motors for drilling bits: 2 sets, Chinese brand
l Control: Manual and automatic alternative
l Water tank: Stainless steel
Machine specification:
l Overall dimension (L.W.H):2200x2000x1600mm
l Worktable height: 750mm
l Weight: 800kg
l Voltage: 220/380/415/480V, 50/60HZHZ(optional)
l Distance from hole center to C-stand: 1250mm
l Hole diameter: 5~80mm
l Glass thickness: 3~19mm
l Concentric tolerance:
l Compressed air consumption: 0.6 It/min
l Pressure: 8 kg/cm2
l Power: 2KW
Quotation components
|
Name |
Glass drilling machine |
Water pump |
Tool |
Water pump |
Drilling bits (12mm) |
|
Qty |
1 set |
1 set |
1 set |
1 set |
2pcs |